Automatic Input Setting - Brother BE-0901E-AC Instruction Manual

Automatic Input Setting

Sewing data can be read from a floppy disk or a computer in
(automatic) or
■ The following items are available for the settings.
Item Contents
Choose the device to read from.
Choose the mode for the reading.
Choose whether or not to continue automatic reading from the start on completion of
the sewing.
Choose whether or not to reflect the initial edit data in following sewing operations.
■ Mode setting is available only when the device to read from is set to
computer or
memory.
■ To choose network as the device and to read the data via the network will require another software
and so on. Please consult our sales office or service station nearby in this case.
F-AT (full automatic) mode.
Reads from a memory.
Reads from a floppy disk.
Reads from a personal computer.
Reads from a network.
MANU : The data selection for the reading can be changed manually on the file
selection screen shown each time with data reading.
AUTO : After the completion of the sewing, pressing
next data reading automatically.
The file selection screen is shown at the first reading only.
(Data for the reading cannot be changed manually after the sewing.)
F-AT : The next data reading will be executed automatically after the completion
of the sewing.
The file selection screen is shown at the first reading only.
(Data for the reading cannot be changed manually after the sewing. This mode is
not available when the device to read from is set to network.)
Discontinues data reading on completion of sewing.
Continues data reading from the start automatically on completion of sewing.
The initial edit data is reflected.
The initial edit data is not reflected.
network. Automatic input is not available if the device to read from is set to
MANU (manual),
will execute the
floppy disk,
AUTO
personal
E-1