Registration Of Sewing Start Position; Hoop Retract Point - Brother BES-1216AC Instruction Manual

Chapter 5 Setting
Register a position to start sewing.
1.
2.
3.
4.
The hoop basic point (retract point) can be set when sewing is interrupted.
1.
2.
3.
Cancellation of Setting
1.
92

Registration of Sewing Start Position

When returning to a registered sewing start position, hold down
.
Press the key.
The hoop coordinates are displayed.
Shift the hoop to a position to start sewing by pressing the
Press .
E N D
Press the key.

Hoop Retract Point

When restarting sewing after the hoop is retracted during an interrupt, press
Press .
Move the hoop by pressing
Press .
E N D
Modified setting is saved and the initial screen or halt screen is displayed again.
The hoop returns to the initial point.
Press once again.
Modified setting is canceled and the initial screen or halt screen is displayed again. The hoop
returns to the initial point.
BES-916AC • BES-1216AC
.
Current hoop coordinates
and press
STOP
.
.