6
Specify units of seconds to record before/after
the occurrence
Item
Enable pre-recording
Enable post-recording
7
Click [OK]
Note:
● A group of images before/after any motion/event is called
a sequence.
● For how to use a sequence, refer to "Searching from the
Image List" (A Page 147) "Searching for Recorded
Images" (A Page 149).
Description
To record images before any
motion/event, select this check
box and enter units of seconds
for recording.
To record images after any
motion/event, select this check
box and enter units of seconds
for recording.
Configuring Mail Settings
Any abnormality in this unit or monitoring system can be
notified through e-mail.
Use 2 windows to configure mail settings.
Notifications related to hardware
● Formatting of built-in HDD
● Formatting of external HDD
● Deterioration of built-in HDD reliability
● RAID abnormality (if applicable)
● Detection of heat radiation stoppage
Notifications from Management Application or
Smart Client
● Motion detection
● Event occurrence
● Disconnection and restoration of communication with
cameras
● Archive error occurrence
Mail Settings of Unit Setting
1
Double-click [4. Unit Setup] on the desktop
The [Unit Setting] window appears.
59