Managing The Sub Memory List - Panasonic PT-D5000ELS Functional Instructions

SIGNAL LIST

Managing the sub memory list

You can restore the sub memory data when using
signals from the same input source. Sub memory data
contains the setting information of screen and image
adjustments, such as BRIGHTNESS, CONTRAST or
ASPECT.
Registering the current settings to the
list
1. Press I or H while the menu is cleared from the screen
after adjustment.
The signal must be registered before creating a sub
memory data of the signal.
Displays the list of corresponding sub memory data to the
signal.
If the creating data is the first sub memory data of the
signal, the status of the signal will be displayed to confirm.
2. Select an empty data slot to register and press the
ENTER button.
Displays the REGISTERED SIGNAL STATUS and change
the name if necessary.
You can return to the previous step by pressing the MENU
button.
3. Select OK and press the ENTER button.
Displays sub memory status and return to the projection.
MEMORY NO. indicates as follows.
Location address
NOTE:
• The memories are numbered over 12 pages (A to L: 8 data
items can be registered on each page), and the data is
registered in the unused memory with the lowest number. If all
the memories are used, the data of the old signals is
overwritten in sequence.
E
NGLISH - 34
A5 (1-2)
Sub memory number:
Displaying the sub memory list and
restoring the settings
1. Press I or H while the menu is cleared from the screen
after adjustment.
Displays the SUB MEMORY LIST.
2. Select the required sub memory data and press the
ENTER button.
Displays the REGISTERED SIGNAL STATUS.
3. Press the ENTER button.
Restores the settings in the data.
Deleting a sub memory data
1. Press I or H while the menu is cleared from the screen
after adjustment.
Displays the SUB MEMORY LIST.
2. Select the required sub memory data and press the
ENTER button.
Displays the REGISTERED SIGNAL STATUS.
3. Press the DEFAULT button.
Displays the SUB MEMORY LIST with change.
You can return to the previous step by pressing the MENU
button.