Back Color.37; Front/Rear.37; Lamp Power.37; Lamp Time.37 - Panasonic PT-L701 XU Operating Instructions Manual

BACK COLOR LAMP POWER
Back color < blue h
V A_
IT' BLACK FI
This sets the color which is
projected onto the screen when no
signal is being input to the projector.
FRONT/REAR
FRONT/REflR i FRONT H
__V A_
H REAR ~D
This setting should be changed in
accordance with the projector
setting-up method.
Set to "FRONT' when using a
norma! reflective screen with the
projector positioned in front of the
screen, and set to "REAR" when
using a translucent screen with the
projector positioned behind the
screen.
DESK/CEILING
|PESK/CEILING< DESK H
_V A_
nrcE i l i n g n
This setting should be changed in
accordance with the projector
setting-up method.
Set to "DESK" when setting up the
projector on a desk or similar, and
set to "CEILING" when suspending
the projector from the ceiling using
the ceiling bracket which is sold
separately.
tftnp POWER A STD » |
_7 A_
m lou n
This setting changes the lamp
brightness. When set to "LOW", the
luminance of the lamp is reduced,
but the projector uses less power,
and the operating noise is also
reduced. This can help to extend
the lamp's operating life. If using the
projector in small rooms where high
luminance is not required, it is
recommended that you set the
LAMP POWER to "LOW".
LAMP TIME
This setting displays the usage time
for the lamp unit which is currently
being used.
NOTE:
• The lamp's operating life varies
depending on the usage
conditions (such as the LAMP
POWER setting and the number
of times the power is turned on
and off).
FUNC 1
IFUNC 1 < INDEX F|
_7 A_
HkevstoneH
This assigns a function to the FI
button of the ET-RM100 full function
remote control unit (sold
separately).
INDEX
• Functions in the same way as the
INDEX WINDOW button on the
accessory card remote control
unit, (page 34)
KEYSTONE
• Functions in the same way as
when "KEYSTONE" is selected
from the MAIN MENU screen,
(page 29)
37