Automatic Adjustment; Using The Function Buttons; Using Eco Button - Panasonic PT-DW530U Operating Instructions Manual

Automatic adjustment

The automatic setup function can be used to
automatically adjust the resolution, clock phase and
picture position when analog RGB signals consisting
of bitmap images such as computer signals are being
input, or to automatically adjust the picture position
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright
white frame at the outermost periphery containing
characters etc. that are clear in white and black
contrast when the system is in automatic adjustment
mode.
Avoid supplying images that involve halftones
or gradation such as photographs and computer
graphics.
button
Press <AUTO SETUP> button on the
remote control or the main unit.
A message [COMPLETE] appears if adjustment is
z
ended normally.
Note
[CLOCK PHASE] may have been shifted even when the
z
adjustment ended normally. In this case, manually adjust
the [CLOCK PHASE].
Refer to "CLOCK PHASE" of "POSITION menu"
Æ
( page 49) for details.
If an image with blurred edges or a dark image is input,
z
[INCOMPLETE] may appear or adjustment may not
be performed properly even if [COMPLETE] appears.
In this case, manually adjust the items of "INPUT
RESOLUTION" of "ADVANCED MENU" (
"SHIFT" and "CLOCK PHASE" of "POSITION menu"
( Æ pages 47, 49).
For specific signals, adjustment should be made
z
according to "AUTO SETUP" of "DISPLAY OPTION
menu" ( Æ page 56).
[AUTO SETUP] may not be available depending on the
z
machine type of the personal computer.
Automatic adjustment may not available for
z
synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during
z
automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.
z
Automatic adjustment can be canceled by pressing
z
<MENU> button during the course of automatic
adjustment.
Even for an RGB signal for which automatic setup is
z
possible, if automatic setup is performed while moving
images are being input, [INCOMPLETE] may appear,
or adjustment may not be performed properly even if
[COMPLETE] appears.
Basic operations using the remote control

Using the function buttons

Three function buttons (<FUNCTION1 to 3>) on the
remote control and the <FUNCTION1> button on the
projector can be assigned to any frequent operations.
They can be used as a useful shortcut button.
1 ) Press any of the <FUNCTION1 to 3>
buttons on the remote control or the
<FUNCTION1> button on the projector.
2 ) Press <MENU> button on the remote
control or the projector to select a
menu option (Main Menu, Submenu or
Advanced Menu).
z
3 ) Hold down any of the <FUNCTION1
to 3> buttons on the remote control
or the <FUNCTION1> button on the
projector more than 3 seconds.
Note
For details, see
z
SETUP". (

Using ECO button

Displays [ECO MANAGEMENT] menu.
Æ page 51),
Press <ECO> button on the remote
control.
Note
For details, see
z
SETUP". (
For the on-screen menu selection, see
screen menu". ( Æ page 39)
"FUNCTION BUTTON" of "PROJECTOR
Æ page 66)
button
"ECO MANAGEMENT" of "PROJECTOR
Æ page 63)
buttons
"On-
37
ENGLISH -