Install The Processor Tray - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 5

Install the Processor Tray

14a. Align processor tray and slide it in.
14b. Check that the peripheral
bay ribbon cables are out
of the way.
14d. Secure all eleven screws.
14. Install the processor tray as follows (see Figure 5-13):
a. Align the tray on the center and side rails and push it in.
b. Check that the peripheral bay ribbon cables do not prevent full insertion
of the processor tray.
c. Push the processor tray levers to the vertical position to lock the tray
into the connectors on the midplane. The levers do not snap into place.
d. Secure all eleven screws to attach the processor cage to the chassis.
14c. Press processor tray levers
into the vertical position.
Figure 5-13. Install Processor Tray
Assembling the LXr 8500
53