HP D7171A - NetServer - LPr Upgrade Manual page 56

Chapter 5
8. Check the I/O configuration switches on the I/O baseboard. By default all
of the switches are set in the "Open" (or "Off") position, and normally do
not have to be changed. See Figure 5-9.
Shaded rectangle
represents the
depressed side
of the configuration
switch
Figure 5-9. I/O Configuration Switch Settings
50
Assembling the LXr 8500
Rear of NetServer
1 Reserved
2 Recovery Boot
3 Reserved
4 Reserved
5 CMOS Clear
6 Password Clear
7 PCI Hot-Plug Switch Disable
8 Reserved
Front of NetServer
Open = Off Closed = On