Download Print this page

HP D7171A - NetServer - LPr Upgrade Manual: Install The Memory Board

Hp netserver lxr 8000 to lxr 8500 upgrade guide.
Hide thumbs

Advertisement

Chapter 5

Install the Memory Board

15. Insert the LXr 8500 memory board(s) into the chassis. (See Figure 5-14.)
a. Lift the LCD handle up until it stops.
b. Locate the memory board guides, and insert the board(s) with the
component-side down.
NOTE
You must insert the memory boards into the board guides for
them to engage correctly.
If you are using only one memory board, it can be installed in either
slot, left or right. There is no need for a terminator in the open memory
board slot.
c. Close the memory board latches by pressing them in toward the center
of each board.
54
15c. Close memory board latches.
Figure 5-14. Insert Memory Board
Assembling the LXr 8500
15a. Lift LCD handle up.
15a. Lift LCD handle up.
15b. Insert one or two
memory boards
(component-side down).

Advertisement

   Related Manuals for HP D7171A - NetServer - LPr

Comments to this Manuals

Symbols: 0
Latest comments: