HP D7171A - NetServer - LPr Upgrade Manual page 43

Chapter 4
Remove just
turn it 180 degrees, and insert it in the LXr 8500.
(Later you will move the remaining processors.)
LXr 8000 Processor Cage
Figure 4-2. Install One Processor in the LXr 8500
5. Replace each processor cage cover. Insert the tabs on the back of the cover
into the matching slots on the rim of the cage. Lower the cover into place
and fasten the captive screws.
Preparing to Assemble the LXr 8500
one
processor from the LXr 8000,
LXr 8500 Processor Cage
37