Chapter 5
Apply Labels, Gaskets and Install Power Supplies
21a. Apply UPGRADED TO LXr 8500
label to chassis below serial number label.
Figure 5-18. Apply Labels to Side of Chassis
21. Locate the two "UPGRADED TO LXr 8500" labels shipped in the
Documentation and Miscellaneous kit, and apply them as follows (see
Figure 5-18):
a. Apply one label just below the serial number on the chassis.
b. Apply the second label to the pull-out card that can be read when the
NetServer is installed in the rack.
58
Assembling the LXr 8500
21b. Apply second UPGRADED
label to pull-out card.