Install the processor air baffle
Install the processor air baffle.
1.
IMPORTANT:
Install the server into the chassis
2.
Connect all peripheral cables to the server.
3.
Press the Power On/Standby button.
4.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
Install the PCI riser board assembly
Align the PCI riser board with the corresponding connector on the system board, and then press down
1.
the riser cage.
If the DIMM latches are not fully closed, the baffle will not sit properly.
("Install the
server" on page 18).
Operations 17