Raidcom Add Thp_Pool; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
U(%)
This displays the usage rate of the pool.
SSCNT
This displays the number of volumes in the pool.
Available (MB)
This displays the available capacity for the volumes data on the pool.
Capacity (MB)
This displays the total capacity of the pool.
Seq#
Sequential number.
Num
This displays the number of LDEVs configuring the pool.
LDEV#
This displays the first number of the LDEV configuring the pool.
H (%)
This displays the threshold value for a pool.

raidcom add thp_pool

Creates a Pool for Thin Provisioning/Smart Tiers. Or, adds a pool volume. A device group can
also be specified instead of an LDEV.
When specifying a pool that is already created for Snapshot, the specified LDEV is added as a
pool volume.
Specify either one of pool ID or pool name certainly. If the specification of both pool ID and pool
name is omitted, it will be rejected with EX_REQARG.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom add thp_pool {{-pool_id <pool ID#> [-pool_name <pool naming>] | -pool_name
<pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}
{-ldev_id <ldev#>
[<device name>]}[ -user_threshold <%> ]

Options and parameters

Option
-pool_id <pool ID#>
-pool_name <pool
naming>
188 Configuration setting commands
[-cnt <count>] | -grp_opt <group option> -device_grp_name <device group name>
Description
Specifies a pool ID (0- 1 27) for Thin Provisioning/Smart Tiers. When the specification of pool
ID is omitted, a pool name must be specified. When the pool name is specified and the pool
ID is omitted, a pool ID is allocated automatically.
Specifies an pool name of a pool for Thin Provisioning/Smart Tiers. Up to 32 characters can
be specified.
When the specification of pool name is omitted, a pool ID must be specified. When the pool
ID is specified and the pool name is omitted, a pool name is allocated automatically in the
form of "New Pool<number>".