Raidcom Add Journal; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 Reference Manual

Syntax

raidcom get hba_wwn -port <port> -[<host group name>]

Options and parameters

Option
-port <port>[<host
group name>]

Examples

Displaying the WWN of the host bus adapter set for the port: CL4-E, the host group 0.
raidcom get hba_wwn -port CL4-E-0
PORT GID GROUP_NAME HWWN Serial# NICK_NAME
CL4-E 0 Linux_x86 210000e08b0256f8 63528 ORA_NODE0_CTL_0
CL4-E 0 Linux_x86 210000e08b039c15 63528 ORA_NODE1_CTL_0
Description on each column in output example
PORT
This displays a port number.
GID
This displays a host group ID of a port.
GROUP_NAME
This displays a host group name of a port.
HWWN
This displays a WWN of registered host bus adapter.
Serial#
Product serial number.
NICK_NAME
This displays a Nick Name of the WWN of host bus adapter.

raidcom add journal

Register a journal volume to a journal. If the journal is not created yet, create it newly, and add a
LDEV. When an existed journal is specified, add a LDEV of that journal.
This makes a Journal for "Open System" or "M/F System" to the specified LDEVs.
If the Journal already exists, the specified LDEV is added to the Journal.
If -timer_type option will be specified, then this makes a journal as "M/F System", if not, this makes
a journal as "Open System".
A device group can also be specified instead of an LDEV.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
Description
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
If setting the host group ID or if the host group name is omitted, the information about host
group ID 0 is displayed.
For example:
CL1-A
CL1-A-g (g is from 0 to 255)
CL1-A Linux_X86
raidcom add journal 145