Raidcom Modify Host_Grp; Syntax - HP StorageWorks P9000 Reference Manual

23 REC command support
33 Set/Report Device Identifier enable
40 V-Vol expansion
41 Prioritized device recognition command
42 Prevent "OHUB PCI retry"
43 Queue Full Response
48 ESAM Svol Read Option
54 Support Option for the EXTENDED COPY command

raidcom modify host_grp

This sets a host mode to the host group on the specified port.
If you want to set Host mode option, then specify "-host_mode_opt" option.
If you want to reset Host mode option, then specify "-host_mode_opt 100."
It ignores when no specified host group does not exist.

Syntax

raidcom modify host_grp -port <port> [<host group name>] -host_mode < host mode>
[-host_mode_opt <host mode option> ]
raidcom modify host_grp 141