Using Windows Server 2003/2008; Changing Between View Mode And Modify Mode - HP XP20000/XP24000 User Manual

Figure 22 Warning - Hostname Mismatch Dialog Box

Using Windows Server 2003/2008

If you are using a Windows Server 2003/2008 computer, a message as shown in
41) may appear during the login operation. If this message appears, take the following steps:
1. Click Add in the message box. The Trusted sites dialog box appears (see
Box (Internet Explorer)" (page
2. In Add this Website to the zone, enter the IP address of the SVP that you want to log in.
3. Click Add. The URL of the SVP is added to the Websites list.
4. Click Close. The Trusted sites dialog box closes.
Figure 23 Internet Explorer Message (When Logging In to the SVP from a Windows Server
2003/2008 Computer)

Changing Between View Mode and Modify Mode

Remote Web Console has two operation modes: Modify and View.
View mode is for viewing the settings of the storage system. The operation mode is View mode
when you log in to Remote Web Console.
Modify mode locks the setting operation of other users so that they cannot change the settings
of the storage system.
You must operate in Modify mode to change the settings of the storage system. You also need
the operation privileges of the function to change the settings of the storage system. For detailed
information on setting operation privileges, see
(page 103).
Only one user can be in Modify mode for each storage system. While a storage administrator is
in Modify mode, all other users can only view the storage system information in View mode. If the
34)).
"Changing User Operation Privileges"
Starting Up and Logging In to Remote Web Console
Figure 23 (page
"Trusted sites Dialog
41