Raidcom Add External_Grp; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Description on each column in output example
LDEV_GROUP
Device group name
LDEV_NAME
Device name in the device group
LDEV#
LDEV number
Serial#
Product serial number

raidcom add external_grp

Maps (creates LDEVs) to add some external VOLs. Only one external VOL is operated in one
operation.
This makes an external volume to the specified external Group, and connects to an external LUN
on the specified external port /wwn. If the external volume group exists, the external volume is
added to the external volume group.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom add external_grp -path_grp <path group#> -external_grp_id <gno-sgno> -port <port>
-external_wwn <wwn strings> -lun_id <lun#> [-emulation <emulation type>]

Options and parameters

Option
-path_grp <path
group#>
-external_grp_id
<gno-sgno>
-port <port>
-external_wwn <wwn
strings>
-lun_id <lun#>
[-emulation <emulation
type> ]
132 Configuration setting commands
Description
Specifies an external VOL path group number (0-63231).
Specifies an external volume group number (gno:1- 1 6384, sgno:1-4096).
For example:
52- 1 1
Specifies the number of the port whose attribute is External.
For example:
CL1-A
Displays an external port.
Specifies a WWN value (hexadecimal value) of the external storage system in 8 bytes. The
value can be split in units of 4 bytes by "," (commas).
For example:
21000e08b0256f8
21000e0,8b0256f8
Displays LUN (0-2047) of the external storage system port.
Specifies an emulation type. If this specification is omitted, OPEN-V is used.
The valid values that can be specified to <emulation type> are the following values
OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, OPEN-V