Acoustics; Laser Safety Statement (U.s.a. Only); Electrostatic Discharge (Esd) Precautions - HP Visualize J5000 - Workstation Handbook

Workstations
Hide thumbs Also See for Visualize J5000 - Workstation:
Table of Contents

Advertisement

Regulatory and Safety Information
Regulatory and Safety Statements
Emissions Regulations Compliance
Any third-party I/O device installed in HP system(s) must be in accordance with the
requirements set forth in the preceding Emissions Regulations statements. In the event
that a third-party non-compliant I/O device is installed, the customer assumes all
responsibility and liability arising therefrom.

Acoustics

Regulation On Noise Declaration for Machines -3. GSGV
Lpa <70dB
operator position
normal operation
per ISO 7779

Laser Safety Statement (U.S.A. Only)

(For workstations that have a CD drive installed.)
The CD mass-storage system is certified as a Class-1 laser product under the U.S.
Department of Health and Human services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968.
This means that the mass-storage system does not produce hazardous laser radiation.
Because laser light emitted inside the mass-storage system is completely confined within
protective housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation.

Electrostatic Discharge (ESD) Precautions

Electrostatic charges can damage the integrated circuits on printed circuit boards. To
prevent such damage from occurring, observe the following precautions when unpacking
and installing the board.
• Stand on a static-free mat.
• Wear a static strap to ensure that any accumulated electrostatic charge discharges from
your body to ground.
• Connect all equipment together, including the static-free mat, static straps, routing
nodes, and peripheral units.
• Keep uninstalled printed circuit boards in their protective antistatic bags.
• Once you have removed printed circuit boards from their protective antistatic bags,
handle printed circuit boards by their edges only.
152
Lpa <70dB
am Arbeitsplatz
normaler Betrieb
nach DIN 45635 T
Appendix B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualize j7000

Table of Contents