6.
Return the drive cage to the down position
7.
Replace the computer cover.
Primary 3.5-inch Internal Hard Drive
1.
Prepare the computer for disassembly
2.
Remove the computer cover
3.
Raise the drive cage to the upright position.
4.
Disconnect the data cable (1) and power cable (2) from the back of the primary hard drive.
Figure 6-40
5.
Remove the four screws on top of the drive cage that secure the hard drive in the bay.
Figure 6-41
64
Chapter 6 Removal and Replacement Procedures
(Computer Cover on page
Disconnecting the Hard Drive Data and Power Cables
Removing the Hard Drive Retainer Screws
(Preparation for Disassembly on page
38).
34).