Download Print this page

HP Rp3000 - Point of Sale System Manual

Hp rp3000 point of sale system - computer setup (f10) utility guide.
Hide thumbs


Computer Setup (F10) Utility Guide
HP rp3000


   Related Manuals for HP Rp3000 - Point of Sale System

   Summary of Contents for HP Rp3000 - Point of Sale System

  • Page 1

    Computer Setup (F10) Utility Guide HP rp3000...

  • Page 2

    © Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and...

  • Page 3: About This Book

    About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

  • Page 4

    About This Book ENWW...

  • Page 5: Table Of Contents

    Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ......................1 Using Computer Setup (F10) Utilities .................. 2 Computer Setup—File ......................2 Computer Setup—Storage ....................3 Computer Setup—Security ....................5 Computer Setup—Power ..................... 7 Computer Setup—Advanced ....................7 Recovering the Configuration Settings ....................

  • Page 6


  • Page 7: Computer Setup (f10) Utility

    Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change factory default settings. ● Set the system date and time. ● Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.

  • Page 8: Using Computer Setup (f10) Utilities

    Using Computer Setup (F10) Utilities Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps: Turn on or restart the computer. As soon as the computer is turned on, press when the blue HP logo screen is displayed to enter Computer Setup.

  • Page 9: Computer Setup-storage

    Table 2 Computer Setup—File (continued) System Information Lists: ● Product name ● SKU number (some models) ● Processor type/speed/stepping ● Cache size (L1/L2) (dual core processors have this listed twice) ● Installed memory size/speed, number of channels (single or dual) (if applicable) ●...

  • Page 10

    Table 3 Computer Setup—Storage (continued) Hard Disk SATA 0 ● Allows you to view the size, model, firmware, serial number, and SATA connector color for the hard drive. ● Emulation Type—Can be set to None (prevents BIOS data accesses and disables it as a boot device) or Hard Disk (treated as hard disk).

  • Page 11: Computer Setup-security

    Table 3 Computer Setup—Storage (continued) DPS Self-Test Allows you to execute self-tests on ATA hard drives capable of performing the Drive Protection System (DPS) self-tests. NOTE: This selection will only appear when at least one drive capable of performing the DPS self- tests is attached to the system.

  • Page 12

    Table 4 Computer Setup—Security (continued) Device Security Allows you to set Device Available/Device Hidden for ● Serial Port A ● Serial Port B ● Serial Port C (if an optional serial port expansion card is installed) ● Serial Port D (if an optional serial port expansion card is installed) ●...

  • Page 13: Computer Setup-power

    Computer Setup—Power NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 5 Computer Setup—Power Option Description ● OS Power ACPI S3 Hard Disk Reset—Enabling this causes the BIOS to ensure hard disks are ready to Management accept commands after resuming from S3 before returning control to the operating system.

  • Page 14

    Pressing causes the system to boot to the recovery partition and launch HP Backup and Recovery. The F11 = Recovery prompt can be hidden with the prompt (hidden/displayed) option (see above). ● Option ROM prompt (enable/disable) Enabling this feature will cause the system to display a message before loading option ROMs.

  • Page 15: Recovering The Configuration Settings

    Table 6 Computer Setup—Advanced (for advanced users) (continued) Bus Options On some models, allows you to enable or disable: ● PCI SERR# generation (enable/disable). ● PCI VGA Palette Snooping (enable/disable), which sets the VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed. Device Options Allows you to set: ●...

Comments to this Manuals

Symbols: 0
Latest comments: