Bezel Blank - HP Rp3000 - Point of Sale System Reference Manual
Service reference guide: hp rp3000 point of sale
Hide thumbs
Also See for Rp3000 - Point of Sale System:
- Troubleshooting manual (65 pages) ,
- Hardware reference manual (57 pages) ,
- Quickspecs (39 pages)
Table of Contents
Advertisement
Bezel Blank
1.
Prepare the computer for disassembly
2.
Remove the computer cover
3.
Push outward on the two retaining tabs that hold the bezel blank in place (1) then pull the blank
inward to remove it (2).
Figure 6-8
4.
Replace the computer cover.
To install a bezel blank, reverse the removal procedure.
(Computer Cover on page
Removing a Bezel Blank
(Preparation for Disassembly on page
38).
34).
Bezel Blank
39
Advertisement
Table of Contents
