Page of 18
HP RP3000 Installation Guide
This document provides step-by-step instructions for setting up your HP system, which contains the
following components:
The RP3000 Terminal
LD-220 Pole Display
HP-123 Cash Drawer
Either the A794 Thermal Printer or the A799 Thermal Printer
The HP L5006tm Touch Screen Monitor
The HP LS2208 Barcode Scanner
The HP IDRA-334133-HP MSR
EziWorx Pty Ltd, PO Box 1 0
P opanyinning , WA 6309
sales@eziworx.com
www.eziworx.com
1 |
P a g e

Advertising

   Related Manuals for HP RP3000

   Summary of Contents for HP RP3000

  • Page 1

    EziWorx Pty Ltd, PO Box 1 0 P opanyinning , WA 6309 sales@eziworx.com www.eziworx.com HP RP3000 Installation Guide This document provides step-by-step instructions for setting up your HP system, which contains the following components: • The RP3000 Terminal • LD-220 Pole Display •...

  • Page 2

    Hardware Ports Note: the following hardware requires Microsoft POS for .Net: • Hp A794 Thermal Receipt Printer • HP A799 Thermal Receipt Printer • HP LD 220 Pole display If you do not have this hardware to install then the next section is unnecessary.

  • Page 3

    Installing Microsoft POS for .NET The installer for Microsoft POS for .NET can be downloaded at: • http://download2.pcamerica.com/drivers/POS_for_.Net.exe 1. Run the installer and select Install. 2. Enter a User Name and Organization and select Next. 3. Select Accept. P a g e...

  • Page 4

    4. Select Typical and then Next. 5. Select Install. 6. Select Finish. P a g e...

  • Page 5

    HP LS2208 Barcode Scanner Configuration The barcodes below are for resetting the HP USB Barcode Scanner to factory defaults and for simulating a carriage return (pressing the Enter key). Scan this barcode to reset all scanner parameters to factory defaults: Table B.

  • Page 6

    ;1234567891234567=12345678912345678912? It is reading from tracks 1 and 2, and the MSR needs to be configured to work with our software. To configure the HP MSR to read only from Track 2 simply install the configuration software (sp32810.exe). The configuration software can be downloaded at: •...

  • Page 7

    Select the location where you want the install files. 4. Select Next. 5. Select Next. 6. Select Yes. 7. Select Yes. 8. Input your User Name and Company Name and select Next. 9. Select Next. 10. Select Typical and select Next. 11.

  • Page 8

    You should receive notification that the changes were sent correctly. Note: If you are using a RP3000, or the RP5700 computer from HP you will have an additional step: 1. In Windows got to Start. 2. Then Control Panel open Add/Remove programs.

  • Page 9

    Installing the HP L5006tm Touch Screen Monitor The driver for the HP l5006tm can be downloaded at: http://download2.pcamerica.com/drivers/HP_TS_sp36100.zip 1. After extracting the files select I accept the terms in the license agreement. 2. Select Next. 3. Select Next to install it to the default directory.

  • Page 10

    4. If the monitor has been detected select Next. 5. You should receive a notification that The display drivers have been installed on your system. 6. Select Finish. 10 | P a g e...

  • Page 11

    Installing the OPOS driver for both the A799 and the A794 NOTE: To install OPOS drivers CRE/RPE Must be running version 12.00 or later. This can be checked at the login screen by going to File then About. Printer install files can be downloaded at: •...

  • Page 12

    4. Select the location to extract the files to and select Next (e.g. C:\SWSetup\SP41178). 5. Select Next. 6. Select the printer(s) that you have (e.g. HP A799 Printer or HP A794 Printer) and select Next. 7. Select YES to have the OPOS Control Objects installed.

  • Page 13

    8. Select Printer Class USB and select Next. 9. Select Yes for the cash drawer Alarm. 10. Select the Destination Folder then select Next. 11. Select Next. 12. Select Finish. 13 | P a g e...

  • Page 14

    4. Highlight Receipt from the options on the left (Select Friendly Printer). 5. Highlight the appropriate HP receipt printer (A799 or A794) from the top right (Select local Windows printer). 6. Under Printer Type select OPOS (requires installation of OPOS driver).

  • Page 15

    Installing the HP-123 Cash Drawer Note: No drivers are required to install the Cash Drawer The cable to install the cash drawer should have a small end (RJ11) and a big end (RJ45). (Pictured Left.) 1. Plug the big end of the cable into the underside of the HP-123 cash drawer.

  • Page 16

    Installing HP LD 220 Pole Display OPOS Driver The OPOS driver for the HP LD 220 Pole Display can be downloaded at: • http://download2.pcamerica.com/drivers/HP_Pole_Display_OPOS.zip 1. After downloading the driver extract and run the installer. 2. Select Next. 3. Select I accept the terms in the license agreement.

  • Page 17

    6. Select Next to begin the OPOS driver installation. 7. Enter a set name to display on the VFD and select Next. 8. Make sure all the options to be installed are checked and select Next. 9. Select Install to install the Driver. 17 | P a g e...

  • Page 18

    1. Select the Options/Manager and enter your password (where applicable). 2. Select Setup and then Setup Screen and re-enter your password if necessary. 3. Select the Hardware tab and choose COM1 for the Pole Display Port. 4. Select OPOS for the Pole Display Type. 5.

Comments to this Manuals

Symbols: 0
Latest comments: