Recovering the Configuration Settings
This method of recovery requires that you first perform the Save to Removable Media command with
the Computer Setup (F10) Utility before Restore is needed. (See
on page 6
in the Computer Setup—File table.)
NOTE:
It is recommended that you save any modified computer configuration settings to a a USB
flash media device or a diskette-like device (a storage device set to emulate a diskette drive) and save
the diskette or device for possible future use.
To restore the configuration, insert the USB flash media device or a diskette-like device (a storage device
set to emulate a diskette drive) with the saved configuration and perform the Restore from Removable
Media command with the Computer Setup (F10) Utility. (See
on page 6
in the Computer Setup—File table.)
Save to Removable Media
Restore from Removable Media
Recovering the Configuration Settings
15