6.
To insert the new battery, slide one edge of the replacement battery under the holder's lip with the
positive side up. Push the other edge down until the clamp snaps over the other edge of the
battery (2).
Figure 6-54
7.
Return the drive cage to the down position.
8.
Replace the computer cover.
9.
Plug in the computer and turn on power to the computer.
10.
Reset the date and time, your passwords, and any special system setups using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics DVD.
11.
Lock any security devices that were disengaged when the computer cover was removed.
74
Chapter 6 Removal and Replacement Procedures
Removing and Replacing a Coin Cell Battery