Installing The Switch In The Optional Hp System/E Rack; Items Required For The Hp System/E Rack - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

Installing the SAN Switch 2/16

Installing the Switch in the Optional HP System/e Rack

This section provides instructions for installing the switch in the
HP System/e rack.

Items Required for the HP System/e Rack

The HP System/e Rack Kit consists of the following items:
HP System/e Rack Rail Kit Hardware, part number A7340-87902, shown next
40
HP System/e Rack Rail Kit, part number A7340-87901
Plenum, part number A7346-00001
Rails
Rear mounting brackets
Rail mounting hardware, shown next:
(6) #8-32 x 5/16 Phillips pan-head screw with captive star lock
washers
(6) #8 Flat washers
(6) M5 Torx head screw with captive lock washers
(2) Rubber washers
(4) M5 U-type Tinnerman clips
SAN Switch 2/16 Version 3.1.x Installation Guide