Shipping Carton Contents - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

Installing the SAN Switch 2/16
Table 3: Shipping Carton Contents
Number
1
2
3
4
5
6
* Depending on time of purchase, the Fixed Rack Mount Kit items listed in
not represent the rail kit that shipped with your switch.
26
Item
One HP StorageWorks SAN Switch
2/16 product accessory bag containing
CD, license, documentation
Two standard AC power cords and two
PDU cords
One RS-232 Serial cable (convertible
to an RJ-45 connector, by removing
the adapter on the end of the cable)
HP StorageWorks SAN Switch 2/16
*Rack Mount Kit containing:
Slide Assembly, includes one Inner and
one Outer Slide Rail, with the following
items preinstalled:
• L-Bracket, Slide Mount, 3-hole (4)
• Power Cord Clips (6)
Pouch containing Rack Mount hardware:
• 3-hole Bar Nuts (4)
• 10-32 x 3/8-inch Phillips pan-head
screws (10)
• 8-32 x 3/16-inch Phillips pan-head
screws (10)
• Square alignment washers (8)
• Right and left rear rack mount
brackets (2); use if installing so that
port side slides from the rear
• Right and left front mount brackets
(2); use if installing so that power
supply end slides out from the front of
the rack
• Rubber mounting feet (4); use if
installing on a flat surface
Description
SAN Switch 2/16 Version 3.1.x Installation Guide
Table 3 may