Managing the SAN Switch 2/16
Interpreting LED Activity
SAN Switch 2/16 status is determined through LED activity. The LEDs will flash
green, yellow, or orange while the switch is booting and while POST or other
diagnostic tests are running. This is normal, and does not indicate a problem.
Note:
about the error log, refer to the
Procedures Guide
Front Panel LEDs
The front panel includes the following LEDs:
Table 4
72
Any errors related to LED activity are listed in the error log. For information
.
One Switch Power LED on the front panel
One Port Status LED above and to the left of each of the 16 ports
One Port Speed LED above and to the left of each of the 16 port
describes front panel LEDs and their functionality.
HP StorageWorks Fabric OS Version 3.1.x/4.1.x
SAN Switch 2/16 Version 3.1.x Installation Guide