Verifying Operation - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

4. Connect the cables to the SFPs as appropriate to the fabric topology, by
Figure 25: Inserting a cable into an SFP
Note:
cable does not slide in easily, check the orientation.

Verifying Operation

After making the appropriate connections, as outlined in this chapter, use these
steps to verify that the switch is running properly.
1. Access your browser.
2. At the URL address window, type http://your switch IP
3. If connected properly, the name of your switch appears (in green) at the
SAN Switch 2/16 Version 3.1.x Installation Guide
positioning each cable so that the key (the ridge on one side of the cable
connector) is aligned with the slot in the SFP, see
The cable is keyed so that it can only be inserted correctly into the SFP. If the
address.
prompt, indicating Healthy/OK.
Installing the SAN Switch 2/16
Figure 25.
SHR-2549A
67