Rear Panel Leds; Rear Panel Led Patterns During Normal Operation - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

Managing the SAN Switch 2/16

Rear Panel LEDs

The rear panel includes the following LEDs:
Table 5
Table 5: Rear Panel LED Patterns During Normal Operation
LED Location
Power Supply
On each
LED
power
supply
Port Status LED
Center of
Back
Panel
76
One power supply LED for each power supply
One Port Readiness LED
describes the LEDs on the rear panel of the switch.
LED Color
Display
No light
Steady green
No Light
Hardware
Status
Power supply is Verify power
not providing supply is on and
power. power cable is
connected to a
valid power
source.
Power supply is No action
providing power. required.
Either the switch Verify that the
is off, or boot is switch is on and
not complete, or boot had time to
boot has failed. complete. If
there is still no
light, contact the
switch supplier.
SAN Switch 2/16 Version 3.1.x Installation Guide
Recommended
Action