Installing The Switch Using The Hp Storageworks San Switch Universal Rack Mount Kit - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

Installing the SAN Switch 2/16
Installing the Switch Using the HP StorageWorks SAN Switch
Universal Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/16 in an HP
rack using the Universal Rack Mount Kit, part number 331148-B21.
The following items are required:
46
SAN Switch 2/16
Power cables
#2 Phillips screwdriver
7/16 wrench or socket
The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware
are listed below:
(2) Rear mounting brackets
A right inner rail and a right outer rail
A left inner rail and a left outer rail
(14) #8-32 x 3/16 Phillips pan-head screw with captive star
lock washer
(10) #10-32 x 1/2 Phillips pan-head screw with captive star
lock washer
SAN Switch 2/16 Version 3.1.x Installation Guide