Installing the SAN Switch 2/16
6. Insert the switch with the attached inner rails into the outer rails.
Note:
comparable EIA rack.
7. Install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock
Figure 20: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
54
This step applies to both the HP System/e rack and the HP 9000 Series or
washers with one on each side.
See
Figure 20
and
Figure
SAN Switch 2/16 Version 3.1.x Installation Guide
21.