Installing Switch Into The Hp Rack - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual
San switch 2/16 version 3.1.x - installation guide
Hide thumbs
Also See for A7340A - Surestore FC 1Gb/2Gb Switch 16B:
- User manual (307 pages) ,
- Installation and reference manual (60 pages) ,
- Quick start manual (52 pages)
Table of Contents
Advertisement
8. Insert the switch with the attached inner rails into the outer rails.
9. Install the two remaining M5 Torx screws to complete the installation. See
Figure 13: Installing switch into the HP rack
10. See the next section,
SAN Switch 2/16 Version 3.1.x Installation Guide
Caution:
Do not use any other screws other than the six that are provided.
Use of any longer lengths can cause damage to internal components of the
switch. Before tightening screws, make sure that the rails are centered to the
overall height of the switch.
Figure
13.
applying power to the switch.
"Connecting AC
Power" on page 56, for instructions on
Installing the SAN Switch 2/16
SHR-2583
45
Advertisement
Table of Contents
