Securing The Rack Mount Brackets; Sliding The Switch Into An Hp 9000 Series Rack - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

3. Slide the switch in the rack, see
Figure 7: Sliding the switch into an HP 9000 Series rack

Securing the Rack Mount Brackets

Secure the rack mount brackets (installed earlier, see
Rack Mount
1. Locate two Phillips head 10-32 x 3/8-inch screws in the Rack Mount Kit
2. Secure each rack mount bracket to the rack rails.
3. Tighten the screws, and torque to 25-inch pounds.
4. See the
SAN Switch 2/16 Version 3.1.x Installation Guide
Brackets" on page 33) to the HP 9000 Series rack rails, as follows.
accessory pouch.
"Connecting AC
power to the switch.
Figure 7.
Power" on page 56 for instructions on applying
Installing the SAN Switch 2/16
SHR-2476A
"Attaching the Rear or Front
39