HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual page 55

Hp 1:10gb ethernet bl-c switch for c-class bladesystem browser-based interface reference guide
Hide thumbs Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

The ARP information includes IP address and MAC address of each entry, address status flags, VLAN,
and port for the address, and port referencing information.
The following table describes the ARP Cache Information controls:
ARP Cache Information controls
Table 31
Control
Show Entries of a Specific Source Port
Show Entries of a Specific VLAN
Show Entry of a Specific IP Address
Clear ARP Cache
Entry #
IP Address
MAC Address
VLAN
Source Port
Flags
The Flags field is interpreted as follows:
Table 32
ARP Dump Flag Parameters
Flag
Interface
Indirect
Unresolved
Description
Displays ARP entries for the selected port(s).
Displays ARP entries for the selected VLAN.
Displays a single ARP entry by IP address.
Clears the ARP data cache.
Displays the numeric identifier of the ARP entry.
Displays the IP address of the ARP entry.
Displays the MAC address of the ARP entry.
Displays the VLAN number of the port where the ARP entry request
is received.
Displays the source port of the ARP entry.
Displays the address status flag for the ARP entry.
Description
Permanent entry created for switch IP interface
Indirect route entry
Unresolved ARP entry. The MAC address has not been learned.
Dashboard
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

1:10gbe

Table of Contents