HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual page 244

Table 176 Access Control List Configuration controls
Control
Tagging Packet Format
Source MAC Address
Destination MAC Address
Ethernet Type
VLAN ID (1-4095)
802.1p Priority
Type of Service (0-255)
Protocol (0-255)
Source IP Address
Destination IP Address
TCP/UDP Src Port (1-65535) Defines a source port for the ACL. If defined, traffic with the specified TCP or UDP
TCP/UDP Dst Port (1-65535) Defines a destination port for the ACL. If defined, traffic with the specified TCP or
TCP Flags
Description
Defines the tagging format for the ACL.
Defines the source MAC address for this ACL.
Defines the destination MAC address for this ACL.
Defines the Ethernet type for this ACL.
Defines a VLAN number and mask for this ACL.
Defines the 802.1p priority for the ACL.
Defines a Type of Service value for the ACL. For more information on ToS, see RFC
1340 and 1349.
Defines an IP protocol for the ACL. If defined, traffic from the specified protocol
matches this filter. Specify the protocol number. Some of the well-known protocols
include:
1—icmp
2—igmp
6—tcp
17—udp
89—ospf
112—vrrp
Defines a source IP address for the ACL. If defined, traffic with this source IP address
will match this ACL. Specify an IP address in dotted decimal notation.
Defines a destination IP address for the ACL. If defined, traffic with this destination IP
address will match this ACL.
source port will match this ACL. Specify the port number. Some of the well-known
ports include:
20—ftp-data
21—ftp
22—ssh
23—telnet
25—smtp
37—time
42—name
43—whois
53—domain
69—tftp
70—gopher
79—finger
80—http
UDP destination port will match this ACL. Specify the port number, just as with
sport above.
Defines a TCP/UDP flag for the ACL.
Configuring the switch
244