Bootstrap Protocol Relay Configuration; Ip Routing General Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual
Hp 1:10gb ethernet bl-c switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
- Command reference manual (208 pages) ,
- Application manual (195 pages) ,
- Cli reference manual (190 pages)
Table of Contents
Advertisement
Bootstrap Protocol Relay Configuration
To display the following form, select Layer 3 > Bootstrap Protocol Relay.
The following table describes the Bootstrap Protocol Relay configuration controls:
Bootstrap Protocol Relay Configuration controls
Table 169
Control
BOOTP Server IP Address
Secondary BOOTP Server
IP Address
BOOTP State
IP Routing General Configuration
To display the following form, select Layer 3 > General.
Description
Sets the IP address of the BOOTP server.
Sets the IP address of the secondary BOOTP server.
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default value is enabled.
Configuring the switch
236
Advertisement
Table of Contents
