IP Interfaces Dashboard
To display the following form, select Layer 3 > IP Interfaces (click the underlined text, not the folder).
The following table describes the IP Interfaces Dashboard controls:
IP Interfaces Dashboard controls
Table 27
Control
Search Range
Search Options
Status
IP Interface ID
IP Address
Subnet Mask
Broadcast Address
Description
To search for an IP Interface, enter a range of IP Interface numbers in the From and To fields.
To focus the search for an IP Interface, enter optional search parameters:
IP Address
Subnet Mask
VLAN ID number
IP Interface State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for IP Interfaces specified in the search range that meet any of the criteria
entered.
and: Search for IP Interfaces specified in the search range that meet all of the criteria
entered.
Click Search to display IP Interfaces that fit the range and meet the criteria entered.
Shows the IP Interface status: enabled (green), disabled (red), or enabled but down (blue).
Displays the numeric identifier of the IP Interface.
Displays the IP address of the IP Interface.
Displays the Subnet Mask of the IP Interface.
Displays the IP Broadcast address for this IP Interface.
Dashboard
51