HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual page 25

The following table describes the switch TACACS+ Dashboard controls:
TACACS+ Dashboard controls
Table 6
Control
Primary Tacacs+ IP Address
Secondary Tacacs+ IP Address
Tacacs+ port
Tacacs+ timeout
Tacacs+ retries
Tacacs+ Server
Tacacs+ Backdoor for Telnet
Tacacs+ Secure Backdoor for telnet/
ssh/http/https
Tacacs+ new privilege level mapping
Tacacs+ Secret
Secondary Tacacs+ Server Secret
Privilege level mappings
Remote Privilege
Local mapping
Description
Displays the primary TACACS+ server address.
Displays the secondary TACACS+ server address.
Displays the number of the TCP port for TACACS+.
Displays the amount of time, in seconds, before a TACACS+ server
authentication attempt is considered to have failed.
Displays the number of failed authentication requests before switching
to a different TACACS+ server.
Displays the status of the TACACS+ server.
Displays the status of the TACACS+ back door for telnet. The telnet
command also applies to SSH/SCP connections and the Browser-
based Interface (BBI). This command does not apply when secure
backdoor (secbd) is enabled.
Displays the status of the TACACS+ back door using secure password
for telnet/SSH/ HTTP/HTTPS. This command does not apply when
backdoor (telnet) is enabled.
Displays the status of the TACACS+ new privilege-level mapping
feature.
Displays the shared secret between the switch and the TACACS+
server(s).
Displays the secondary shared secret between the switch and the
TACACS+ server(s).
Displays the TACACS+ server privilege levels.
Displays the HP 1:10GbE switch privilege-level mapping.
Dashboard
25