HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual page 251

The following table describes the Failure Detection Pair Configuration controls:
Failure Detection Pair Configuration controls
Table 182
Control
Enable/Disable FDP
LtM Ports Available
LtM Ports Selected
LtD Ports Available
LtD Ports Selected
LtM Trunks Available
LtM Trunks Selected
LtD Trunks Available
LtD Trunks Selected
LtM Admin Keys Available
LtM Admin Keys Selected
LtD Admin Keys Available
Description
Enables or disables the Failover Pair.
Lists the ports that can be added to the Link to Monitor (LtM). Only uplink
ports (19-25) are allowed in the LtM.
Lists the ports that are members of the LtM.
Select a port number in the LtM Ports Available list and click Add to add the port to
the LtM.
Select a port number in the LtM Ports Selected list and click Remove to remove the
port from the LtM.
Lists the ports that can be added to the Link to Disable (LtD). Only downlink
ports (1-16) are allowed in the LtD.
Lists the ports that are members of the LtD.
Select a port number in the LtD Ports Available list and click Add to add the port to
the LtD.
Select a port number in the LtD Ports Selected list and click Remove to remove the
port from the LtD.
Lists the trunk groups that can be added to the Link to Monitor (LtM). The LtM trunk
group can contain only uplink ports (19-25).
Lists the trunk groups that are members of the LtM.
Select a trunk group number in the LtM Trunks Available list and click Add to add
the trunk group to the LtM.
Select a trunk group number in the LtM Trunks Selected list and click Remove to
remove the trunk group from the LtM.
Lists the trunk groups that can be added to the Link to Disable (LtD). LtD trunk groups
can contain only downlink ports (1-16).
Lists the trunk groups that are members of the LtD.
Select a trunk group number in the LtD Trunks Available list and click Add to add the
trunk group to the LtD.
Select a trunk group number in the LtD Trunks Selected list and click Remove to
remove the trunk group from the LtD.
Lists the ports whose LACP Admin keys can be added to the Link to Monitor (LtM).
The LtM trunk group can contain only uplink ports (19-25).
Lists the ports whose LACP Admin key is a member of the LtM.
Select a port in the LtM Admin Keys Available list and click Add to add the port's
Admin key to the LtM.
Select a port in the LtM Admin Keys Available list and click Remove to remove the
port's Admin key from the LtM.
Lists the ports whose LACP Admin keys can be added to the Link to Disable (LtD).
LtD trunk groups can contain only downlink ports (1-16).
Configuring the switch
251