Static FDB Configuration (part one)
To display the following form, select Layer 2 > FDB >Static FDB (click the underlined text, not the
folder).
This form summarizes the Static Forwarding Database entries. Select a static FDB ID number to display the
Static FDB Configuration form. Click Clear to clear the static FDB entries.
Static FDB Configuration (part two)
To display the following form, select Layer 2 > FDB >Static FDB > Add static FDB entry.
The following table describes the Static FDB Configuration controls:
Table 113
Static FDB Configuration controls
Control
FDB Table Index (1-128)
MAC
Description
Configures the index ID number of the static FDB entry.
Configures the MAC address of the static FDB entry.
Configuring the switch
167