User Access Control Configuration
To display the following form, go to the User Configuration Table and click Add User.
The following table describes User Access Configuration controls:
User Access Configuration controls
Table 98
Control
User ID (1-10)
Set Class of Service
Set user name (0-8 chars)
Set user password (0-128 chars)
Re-type user password (0-128 chars)
User Status
Description
Sets a numeric identifier for the user.
Sets the Class-of-Service to define the user's authority level.
Defines the user name of maximum eight characters.
Sets the user password of up to 128 characters maximum.
Confirms the user password.
Enables or disables the user.
Configuring the switch
144