Advanced> Mac> Address Aging; Advanced> Mac> Static Addresses - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

700 Series Software Manual v2.1
Advanced> MAC> Address Aging
Figure 5-38: MAC > Address Aging
Aging Time is a variable that must be configured. Its purpose is to determine the amount of time an
entry is held in the forwarding tables while no activity occurs from that address. Entries should be
removed to update the table for MAC addresses that have moved or are turned off.
• The industry standard default value is 300 seconds (5 minutes).
• The administrator may change this value to any value between 10 and 1,000,000 seconds.
• After changing the value, click 'Apply'
Advanced> MAC> Static Addresses
Figure 5-39: MAC > Static Addresses
5-38 Web-Based Management Interface