NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual page 137

Figure B-4 shows the RJ-45 plug and RJ-45 connector.
Figure B-4: RJ-45 Plug and RJ-45 Connector with Built-in LEDs
Table B-2 lists the pin assignments for the 10/100 Mbps RJ-45 plug and the RJ-45 connector.
Table-B-2. 10/100 Mbps RJ-45 Plug and RJ-45 Connector Pin Assignments
PIN NORMAL ASSIGNMENT ON
PORTS 1 TO 8
1 Input Receive Data +
2 Input Receive Data –
3 Output Transmit Data +
6 Output Transmit Data –
4, 5, 7, 8 Internal termination, not used for data transmission
Table E-2 lists the pin assignments for the 100/1000 Mbps RJ-45 plug and the RJ-45 connector.
Cabling Guidelines
700 Series Software Manual v2.1
UPLINK ASSIGNMENT ON
PORT 8
Output Transmit Data +
Output Transmit Data –
Input Receive Data +
Input Receive Data –
B-7