Show System - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

700 Series Software Manual v2.1
Interface
The
show spanning-tree interface
particular port.
Syntax
FSM726# show spanning-tree interface ethernet <x/y>
Where
= x is the stack number (always 1 in the case with FSM726), and y is the port number.
<x/y>
An example of the display output is shown below:.
Interface Fa1/23 (port 23) in Spanning tree is FORWARDING
Port path cost 128, Port priority 19
Designated root has priority 32768, address 0009.5b36.b007
Designated bridge has priority 32768, address 0009.5b36.b007

Show System

The command displays system-related data.
show system
Syntax
FSM726# show system
An example of the display output is shown below.
System Uptime: 0 Days 1 hr. 42 min. 15 sec.
System Description: FSM726 Managed Switch
System name: Switch #1
System contact: Tom
System location: Closet #2
MAC Address: 00:09:5b:36:b0:07
IP Assignment Mode: Manual
IP Address: 169.254.224.1
Network Mask: 255.255.0.0
Gateway Address: 169.254.224.5
Web Access is: Enabled
Telnet Access is: Enabled
Password is: Disabled
User Authentication Mode is Local
6-10
command displays the spanning tree state of a
Command Line Interface