NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual page 98

700 Series Software Manual v2.1
Aging Time
The
show mac-address-table aging-timer
the mac-address-table.
Syntax
FSM726# show mac-address-table aging-timer
Dynamic
The
show mac-address-table dynamic
addresses.
Syntax
FSM726# show mac-address-table dynamic
An example of the display output is shown below.
Destination Address Address Type Destination Port
------------------- ------------ ----------------
00.06.5b.69.3d.be
Multicast-Static
The
show mac-address-table multicast-static
addresses
Syntax
FSM726# show mac-address-table multicast-static
Static
The
show mac-address-table static
Syntax
FSM726# show mac-address-table static
6-6
Dynamic FastEthernet1/23
command is used to display the aging timer of
command displays the dynamically learned MAC
command displays the static multicast
command displays configured static addresses.
Command Line Interface