Advanced> Vlan> Primary Vlan - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

Advanced> VLAN> Primary VLAN
Figure 5-34: Primary VLAN
A 'U' or 'T' will be displayed for each port assigned to the VLAN, where 'U' stands for untagged
and 'T' for tagged. If a port is an untagged member of a VLAN, the VLAN tag will be striped from
the frame before it is sent out that port. If the port is a tagged member of a VLAN, the VLAN tag
will stay in the frame when it is sent. A blank indicates that the port is not a member of the
particular VLAN, and will not get any traffic for that VLAN. The VLAN tagging option is a
standard set by the IEEE to facilitate the spanning of VLANs across multiple switches (Reference:
Appendix A, "Virtual Local Area Network"
Area Networks).
From this menu, you can create a new VLAN, add new ports to an existing VLAN, remove ports
from an existing VLAN or, delete a VLAN.
Create a new VLAN Group:
Under the Show VLAN drop-down menu, select Add a new VLAN.
1.
Enter the VLAN Id and name in the provided fields.
2.
Add VLAN members if so desired. (See below).
3.
Click Apply.
4.
Delete a VLAN Group:
Check the Remove VLAN box for the VLAN you want to remove.
1.
Click Apply.
2.
Web-Based Management Interface
700 Series Software Manual v2.1
and IEEE Std 802.1Q-1998 Virtual Bridged Local
5-33