Snmp Server - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

IGMP
The
multimedia igmp
Syntax
FSM726(config)# multimedia igmp
HPO
The
multimedia hpo
traffic flows through the switch, if there is a conflict between maximizing high priority traffic or
ensuring flow control, the switch will favor the high priority traffic. Use the no hpo command to
optimize for flow control.
Syntax
FSM726(config)# multimedia hpo
No
The command negates one of your previously given commands.
No
Syntax
FSM726# no <commands>
Where
= the command which you wantwant to negate.
<command>

SNMP Server

SNMP (Simple Network Management Protocol) enables you to manage the switch through the use
of a network management station running an SNMP server. Items such as trap settings,
community, and hosts are configured through the s
Community
You can create up to eight different community strings with combinations of privileges. These
community strings need to be set prior to setting host access, as the host table depends on the
existence of community strings
Command Line Interface
command enables Internet Group Management Protocol on the switch.
command enables High Priority Optimization (HPO). This means that as
700 Series Software Manual v2.1
command.
nmp-server
6-23