Dot1X - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

700 Series Software Manual v2.1
Where
= The DSCP value, which ranges from 0-63
<DSCP>
= The priority associated with the defined DSCP value. The available options are
<Priority>
normal and high
For example, suppose you want to set DSCP 33 to high, the command to do so would be:
FSM726(config)# diffserv 33 high

Dot1x

The RADIUS Server IP Address must be configured first before enabling 802.1x. Otherwise
Port-Based Authentication will not take effect. You can also set a RADIUS server shared secret.
The Re-authentication Timer allows the user to specify the time interval between authentication
server's checks of users connected to the network. The default time interval is 3600 seconds and
the range is from 1 - 65535 seconds.
Figure 6-1: Config Dox1x commands
Syntax
FSM726(config)# dot1x 123.123.123.12
6-14 Command Line Interface