NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual page 20

700 Series Software Manual v2.1
Examples of terminal-emulation programs include:
• HyperTerminal, which is included with Microsoft Windows operating systems
• ZTerm for the Apple Macintosh
• TIP for UNIX workstations
This example describes how to set up the connection using a HyperTerminal on a PC, but other
systems follow similar steps.
Click the Windows Start button. Select Accessories and then Communications. HyperTerminal
1.
should be one of the options listed in this menu. Select HyperTerminal
The following screen will appear. Enter a name for this connection. In the example below, the
2.
name of the connection is FSM726. Click OK.
Figure 4-2: Connection Description
The following screen will appear. In the bottom, drop down box labeled Connect Using, click
3.
the arrow and choose the COM port to which the switch will connect. In the example below,
COM1 is the port selected. Click OK.
Figure 4-3: COM Port Selection
4-2 Administration Console Telnet Interface