Status > Switch Statistics
The Switch Statistics Chart allows you to compare one type of statistic across all the ports. You
can reset the counters in the Reset Statistics page.
Figure 5-4: Switch Statistics
You can configure the following options on the Switch Statistics Chart:
•
Statistics
•
Refresh Rate
•
Color
There are 24 kinds of Statistics that you can review on this screen:
•
Inbound Octet Rate: Received Byte per second.
•
Inbound Unicast Packet Rate: Received Unicast packet per second.
•
Inbound Non-unicast Packet rate: Received Non-unicast packet per second.
•
Inbound Discard Rate: Received and is discarded packet per second.
•
Inbound Error Rate: Received error packet per second.
•
Outbound Octet Rate: Transmitted byte per second.
•
Outbound Unicast Packet Rate: Transmitted unicast packet per second.
Web-Based Management Interface
The type of system data to be monitored
The time interval between automatic refreshes (5, 10, 15, 30 seconds)
The color setting for the chart
700 Series Software Manual v2.1
5-5